475 Unwin Ave, Toronto, ON M4M 3M2
1 833 UCYACHT (829 2248)
Add to Watch List

35' 1977 Goderich 35 Custom Steel***SOLD***

REDUCED

Type: Sailboat
Year: 1977
Make: Goderich
Model: 35 Custom Steel***SOLD***
Length: 35'
Status: Sold
Price: $ 39,900
Location: Kingston, Ontario
Date Posted: 2015-08-04

Contact the Broker

Red fields are required

LOCATION: KINGSTON, ONTARIO 

Marble is a fast, comfortable and spacious ocean cruising boat with nice lines, equipped to take you anywhere. She has a large amount of storage space, including 3 hanging lockers plus a 4th one converted to shelving for small clothing articles. There are 3 lazerettes in the cockpit  and many storage bins under the seats and berths, and around the cabin bulkheads. The interior was nicely finished mostly in teak by a cabinet maker.  


A Ted Brewer design, factory built in round bilge steel by Huromic Metalworks of Goderich Ontario. The interior was finished by a professional cabinet maker, mostly in teak. She was launched in 1979 and crossed the Atlantic twice with the original owner and went to the Bahamas with her second owner. The third and most recent owner – purchased in 2002 – stayed in fresh water.

Additional Specs, Equipment and Information:


Boat Name
Marble

Engines
Engine Brand: Volvo


General Information

LOA 35' 8" 
LWL 28' 4"  
Beam 11' 8"                                      
Draft 4' 10"  
Displacement ~22000 lb                   
Ballast 6200 lb (approx)  
Sail Area 644 sq ft                             
Power, Volvo MD11C Diesel  
Fuel Capacity 42 US Gal                   
Water Capacity 72 US Gal (2 SS tanks)  
SS Holding Tank with y-valve and macerator pump for offshore use.  
Deck wash pump  
Mast Height above water 55'              
Standing Headroom 6' 4 1/2"  Berths 6 

Interior

10 opening ports, 4 dorades, one hatch in v-berth, main hatch has 2 sets of drop boards and a bug screen. Also a bug screen that covers the entire cockpit

Double SS galley sink with manual and electric pumps

Small SS sink in head

Gimballed propane 2 burner stove with oven and broiler/toaster

Force 10 propane cabin heater (not presently connected to propane)

Xintex gas alarm with 2 sensors and auto shut-off

Adler Barber 12 volt refrigeration

Berths for up to six. Saloon settee converts to sea berth

Chart table with chart storage. Additional chart storage overhead in quarter berth.

Equipment

Ground Tackle:

Anchors : 60 lb Plow, 45 lb Plow, 14 lb Fortress aluminum anchor 

Windlass: Solid bronze 2 speed 1100 pound capacity manual windlass, with 300 ft of 3/8" chain used only a few times since being re-galvanized

Rigging:

  • Standing :  including a new mast  were installed in fall 1997. All wires are connected using StaLock fittings. All chain plates are stainless steel, welded on. All internal mast halyards  replaced – 2014.
  • Running : Cutter rigged, self-tacking staysail  with  jib and staysail furling. Three cruising sails new in 1995. 100% genoa, staysail, cruising main are all 8oz cloth (Kingston Sail Loft). In November 2015 staysail modified for furling, staysail furler added in 2015. Asymmetrical – purchased from Kingston Sail Loft ~ 2006 - used 4 to 6 times.

Garhauer Genoa Cars/Track – 2014

Wheel Steering:  "Whitlock" rack and pinion push rod system; no cables

Autopilot:  Raymarine EV-100 Wheel – installation in progress

Wind Vane Self Steering:  "Levanter", similar to Hydrovane

Propeller: Variprop feathering prop

Electrical:

  • Engine Alternator: Heavy duty "Ample Power" 105A alternator with 3-step regulator
  • On-board Phase Three 3 stage ‘ intelligent’ battery charger
  • Boat shore power isolation transformer Charles 3.8 KVA  International Universal  IsoTransformer
  • Wind Turbine:  Older "Four Winds Two" wind turbine with speed brake.
  • Space for 2 banks of house batteries and one separate engine starting battery, each bank independent, with its own switch. Only one bank of house batteries is populated -  2 x Trojan 12 V batteries – 2014

Sestrel Moore solid bronze steel boat compass

Magma BBQ, (new grill 2015)

VHF Radio, Navman Depthsounder, Knotmeter

 

Other

Stanchions - extra heavy duty stainless with double life lines.

Scuppers and Hawse Holes - lined with stainless steel.

Boom Gallows - extra heavy duty teak and aluminum pipe.

Winter cover with Kover Klamps frame

Dodger (2014), Bimini and Sun Shades (2015)

Steel Cradle

9' 3" Zepellin "Bear" inflatable dinghy.

Yamaha 8 hp Outboard (tuned up 2015) new fuel tank 2015

 

Recent Maintenance

  • Replaced propane hose to Galley stove – 2015
  • Injectors cleaned – 2015 (Kingston Diesel Services/Luc’s Repair Shop)
  • Re-galvanized chain rode
  • New wet exhaust hose 2014
  • Stuffing box repacked – 2014
  • New impeller – 2014
  • All sails maintained by Andy Soper (Kingston Sail Loft)
  • Boat bottom and top sides were professionally sandblasted and epoxy painted  - 2011    
  • The engine received a top overhaul (pistons, sleeves, big end bearings)  - 2000

 


Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice. 
My Watch List

Buy and Sell with confidence using United City Yachts Industry leading Partner Network


Cross border transactions

Buy/Sell in the USA leveraging our partnership with Livingston International

Protect your funds

All transactions handled via a dedicated trust account at Baker Tilly, an internationally recognized accounting firm